N N-Dimethyl-4-[(trimethylsilyl)ethynylalpha
N,N-Dimethyl-4-[(trimethylsilyl)ethynyl]aniline
CAS: 40230-97-5
Molecular Formula: C13H19NSi
N N-Dimethyl-4-[(trimethylsilyl)ethynylalpha - Names and Identifiers
| Name | N,N-Dimethyl-4-[(trimethylsilyl)ethynyl]aniline |
| Synonyms | N N-Dimethyl-4-[(trimethylsilyl)ethynylalpha N,N-Dimethyl-4-[(trimethylsilyl)ethynyl]aniline n,n-dimethyl-4-[(trimethylsilyl)ethynyl]aniline N,N-Dimethyl-4-[(trimethylsilyl)ethynyl]benzeneamine Benzenamine, N,N-dimethyl-4-[2-(trimethylsilyl)ethynyl]- |
| CAS | 40230-97-5 |
| InChI | InChI=1S/C13H19NSi/c1-14(2)13-8-6-12(7-9-13)10-11-15(3,4)5/h6-9H,1-5H3 |
N N-Dimethyl-4-[(trimethylsilyl)ethynylalpha - Physico-chemical Properties
| Molecular Formula | C13H19NSi |
| Molar Mass | 217.38 |
| Density | 0.94±0.1 g/cm3(Predicted) |
| Melting Point | 86-90°C(lit.) |
| Boling Point | 274.7±32.0 °C(Predicted) |
| pKa | 5.75±0.24(Predicted) |
| Storage Condition | 2-8°C(protect from light) |
N N-Dimethyl-4-[(trimethylsilyl)ethynylalpha - Risk and Safety
| Hazard Symbols | Xi - Irritant |
| Risk Codes | 36/37/38 - Irritating to eyes, respiratory system and skin. |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36 - Wear suitable protective clothing. |
| WGK Germany | 3 |
N N-Dimethyl-4-[(trimethylsilyl)ethynylalpha - Introduction
N,N-Dimethyl-4-[(trimethylsilyl)ethynyl]aniline is an organic compound with the chemical formula C14H21N. The following is a description of its nature, use, formulation and safety information:
Nature:
-Appearance: Colorless to light yellow liquid
-Molecular weight: 211.32g/mol
-Melting Point: Not Applicable
-Boiling point: 188-190 ℃
-Solubility: Soluble in common organic solvents, such as alcohols, ketones and chlorinated hydrocarbons
-Odor threshold: no obvious odor
Use:
- N,N-Dimethyl-4-[(trimethylsilyl)ethynyl]aniline have many uses in chemical research and industrial production, mainly for catalysts, ligands and intermediates in organic synthesis reactions.
Preparation Method:
-It can be obtained by reacting N, N-dimethyl-4-ethynylaniline and methyltrichlorosilane under alkaline conditions. The reaction is usually carried out in a heated environment.
Safety Information:
- N,N-Dimethyl-4-[(trimethylsilyl)ethynyl]aniline is an organic compound and needs to follow general laboratory safety procedures when used.
-Avoid contact with skin, eyes and mouth, and wear appropriate protective gloves, safety glasses and respiratory protective equipment when necessary.
-During storage and handling, avoid contact with harmful substances such as strong oxidants, strong acids, and strong alkalis to prevent dangerous reactions.
-During handling and storage, good ventilation should be maintained to avoid the accumulation of harmful gases.
-In the event of inhalation, ingestion or skin contact, seek medical help immediately and provide the necessary information to the doctor with the packaging or chemical safety data sheet.
Nature:
-Appearance: Colorless to light yellow liquid
-Molecular weight: 211.32g/mol
-Melting Point: Not Applicable
-Boiling point: 188-190 ℃
-Solubility: Soluble in common organic solvents, such as alcohols, ketones and chlorinated hydrocarbons
-Odor threshold: no obvious odor
Use:
- N,N-Dimethyl-4-[(trimethylsilyl)ethynyl]aniline have many uses in chemical research and industrial production, mainly for catalysts, ligands and intermediates in organic synthesis reactions.
Preparation Method:
-It can be obtained by reacting N, N-dimethyl-4-ethynylaniline and methyltrichlorosilane under alkaline conditions. The reaction is usually carried out in a heated environment.
Safety Information:
- N,N-Dimethyl-4-[(trimethylsilyl)ethynyl]aniline is an organic compound and needs to follow general laboratory safety procedures when used.
-Avoid contact with skin, eyes and mouth, and wear appropriate protective gloves, safety glasses and respiratory protective equipment when necessary.
-During storage and handling, avoid contact with harmful substances such as strong oxidants, strong acids, and strong alkalis to prevent dangerous reactions.
-During handling and storage, good ventilation should be maintained to avoid the accumulation of harmful gases.
-In the event of inhalation, ingestion or skin contact, seek medical help immediately and provide the necessary information to the doctor with the packaging or chemical safety data sheet.
Last Update：2024-04-10 22:29:15
Supplier List
View History
N N-Dimethyl-4-[(trimethylsilyl)ethynylalpha
AKOS BBS-00002108
Monomethyl benzene
4-[(2-methylpropan-2-yl)oxycarbonyl]benzoic Acid
3-BROMOBENZAMIDINE HYDROCHLORIDE
2-AMINO-3-CHLORO-5-NITROBENZONTRILE
Reactive Yellow KE-4R
5-[(2S)-2-aminopropyl]-2-methoxybenzenesulfonamide
2-溴-4-硝基苯甲酸甲酯
2-Trimethylsilanyl-pyridine
AKOS BBS-00002108
Monomethyl benzene
4-[(2-methylpropan-2-yl)oxycarbonyl]benzoic Acid
3-BROMOBENZAMIDINE HYDROCHLORIDE
2-AMINO-3-CHLORO-5-NITROBENZONTRILE
Reactive Yellow KE-4R
5-[(2S)-2-aminopropyl]-2-methoxybenzenesulfonamide
2-溴-4-硝基苯甲酸甲酯
2-Trimethylsilanyl-pyridine